X9 Owners & Riders Club
October 15, 2025, 10:34:38 *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News:
 
   Home   Help Website Gallery Login Register Donate  
Pages: [1]   Go Down
  Print  
Author Topic: Emissions  (Read 1719 times)
sinky
Cafe Racer
***
Offline Offline

Posts: 175


Fuengirola, Costa del Sol,Spain


« on: January 09, 2024, 12:19:54 »

Hi everybody hope you are well.

I live in Spain and my 2003  x9 200 Evo has to go through a check up ITV / MOT every 2 years.

It's due in about 5 months . The last time I took it it failed. I then have a month to fix then get a free retest.
It passed second time just.

Different examiner.

All I done was removed the air filter and gave it a hard time the morning of the retest.
It is a bit smelly . What can I do to fix this?

It's done 78000 km and maintained by me
It Runs great.
Iv never changed the spark plug for a while? 
Should I take it to a proper mechanic for a tune up.  No smoke from the exhaust just a bit fumey . Fuel consumption isn't the best either.

Another 2 year itv would be excellent .
Any help or tips would be appreciated. .

Thanks Paul

Logged

X9 200 Evo  2003
X9 200 Evolution 2003 for parts
RobShed
Member
Member
*
Offline Offline

Posts: 37



« Reply #1 on: January 10, 2024, 10:40:12 »

When I got my 250SL X9 I put a new spark plug and airfilter in plus coolant change and Goop sealant in the tyre valves as a preventative measure/rim leak stopper.
Logged

Gina shares the current stable with Nelly (Tornado 900). Had a Vespa 150 Super when I was 18 and my dad courted on a Maicoletta. 2 wheels are in my blood as I'm also a Time Trialist and general headcase. Gold E46 ragtop and Fiat Coupe 16VT are my current/most recent brum-brums. 61 and won't grow up. Acquired the 2003 250SL on 6th June 2021 and so far have lifted the screen to height position 3 and replaced the OEM seized shockers with YSS jobbies with 2 chunky washers each side of the replacement units+original spacer on preload 2/5. Replaced the worn Avon Viper Stryke boots with Pirelli Angel Scooter. 25K miles used but not abused workhouse from Cov with yearly service for sub-a-grand so happy days. A few scuffs but nowt of consequence. 20mm thick Neoprene sponge bonded to glitzy, reflective Jintan top box with pillion back rest solid bumper lump. Just changed my n/s rear light bulb without removing the rack and top box. No mods to the rear panel hooks performed either and re-installed the 2 x 10mm bolts for rear light integrity so not to rely on the 2 x latch panel/cover screws.
Dave Milnes
Administrator
Old Timer
*****
Offline Offline

Posts: 21327


Millom Cumbria


« Reply #2 on: January 10, 2024, 16:08:48 »

It's got a carb hasn't it, so just weaken it off a bit, new air filter and plug and make sure it's fully warmed up.
Logged

2021 Honda NSS750 Forza
Anderton 2004, Pen-y-cae 2005, Matlock 2006, Hay on Wye 2007, Minehead 2008, St Florence 2010, Newent 2011, North Kyme 2012, Betsw-y-coed 2013, Hardraw 2014, Parkend 2015, Whitby 2016, Mundesley 2017, Derby 2018, Telford 2019, Lake District 2024, Durham 2025
allen m
Cafe Racer
***
Offline Offline

Posts: 390



« Reply #3 on: January 10, 2024, 16:24:01 »

Check and possible replace the air filter and make sure the is nothing blocking the air intake duct.
My X9 125 was very difficult to start but OK when warmed up. The electric choke had failed in the warm engine position. Is it possible, if there is one on yours, that it has failed in the cold engine position?
Logged

Allen Morgan. First time scooter rider (X9 Evo 125cc Imperial Blue 2006 reg) since January 2014 after being on Bikes from 50cc to 650cc since 1958 (and cars since 1962).
sinky
Cafe Racer
***
Offline Offline

Posts: 175


Fuengirola, Costa del Sol,Spain


« Reply #4 on: January 12, 2024, 08:40:51 »

Thanks guys .Dave . Where's the screw to weaken the carb please. Which way do you turn ? Clockwise anti clockwise ?I know the idle one on the top. Thanks
Logged

X9 200 Evo  2003
X9 200 Evolution 2003 for parts
Dave Milnes
Administrator
Old Timer
*****
Offline Offline

Posts: 21327


Millom Cumbria


« Reply #5 on: January 12, 2024, 14:28:32 »

Not sure but clockwise is usually to weaken. Depending on which carb you have as there are two types, but the screws are in a similar location

or

Note how much you are turning it so you can always go back to how it is now, go a half turn and see if it makes any difference to reliable running, if not try another half turn. If it tends to stall or is hard to start, go back a quarter.
Logged

2021 Honda NSS750 Forza
Anderton 2004, Pen-y-cae 2005, Matlock 2006, Hay on Wye 2007, Minehead 2008, St Florence 2010, Newent 2011, North Kyme 2012, Betsw-y-coed 2013, Hardraw 2014, Parkend 2015, Whitby 2016, Mundesley 2017, Derby 2018, Telford 2019, Lake District 2024, Durham 2025
sinky
Cafe Racer
***
Offline Offline

Posts: 175


Fuengirola, Costa del Sol,Spain


« Reply #6 on: January 12, 2024, 16:24:02 »

Perfect. Thank you 👍
Logged

X9 200 Evo  2003
X9 200 Evolution 2003 for parts
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!