X9 Owners & Riders Club
May 22, 2022, 21:08:33 *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Website Gallery Login Register Donate  
Pages: [1]   Go Down
  Print  
Author Topic: X8 400 Clock  (Read 8115 times)
sixpenny
Full Cat A
**
Offline Offline

Posts: 73


Kymco Downtown 300i owner located in Dorset


« on: December 10, 2016, 10:39:24 »

Hi Guys,
Had a problem with the battery which has now been replaced and all is working well except the clock! I need to reset clock to correct time, but pressing the reset button in the small left hand cubby has no effect....any ideas would be much appreciated.
Cheers  George
Logged
ragoody
Guest
« Reply #1 on: December 10, 2016, 15:34:27 »

George,  Had the same issue with mine. You can remove the reset button from its seated position and disconnect it from its wiring, the button separates with the top button pulling away from the stem, this will show two sets of contacts (one on the button and one inside) you will find these are oxidised due to age and need a little cleaning. Once clean re-assemble and reconnect. It should work fine after this.

I was very wary whilst doing it as not very hands on but it only took about 10 minutes in total.  Bob
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!