X9 Owners & Riders Club
May 22, 2022, 19:18:50 *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Website Gallery Login Register Donate  
Pages: [1]   Go Down
  Print  
Author Topic: x7 250ie  (Read 10922 times)
polecat
Cafe Racer
***
Offline Offline

Posts: 211


« on: June 12, 2015, 18:29:12 »

well the scooter sailed through the mot today i must have done a decent job on replacing the swing arm bearings etc. last year and fitting grease nipples to the  swing arm must have helped no play so well pleased now the scoot is sorted just need the weather for a few runs
polecat
Logged

scooter piaggio x7 125cc 2008
bedlington northumberland
Dave Milnes
Administrator
Old Timer
*****
Offline Offline

Posts: 21132


Fylde Coast


« Reply #1 on: June 13, 2015, 08:38:16 »

Nice job. Is there any chance you can do a 'how to' and stick in in here http://www.x9ownersclub.co.uk/forum/index.php?board=69.0 with photos if you have any. This is probably something that will be forever needed and a properly done 'mod' that solves a design flaw is worth bragging rights!
Logged

2004 X9 500 Evo in YELLOW - 2016 Maxsym 600i Sport
Anderton 2004, Pen-y-cae 2005, Matlock 2006, Hay on Wye 2007, Minehead 2008, St Florence 2010, Newent 2011, North Kyme 2012, Betsw-y-coed 2013, Hardraw 2014, Parkend 2015, Whitby 2016, Mundesley 2017, Derby 2018, Telford 2019, Loch Doon 2020, Cumbria 2021.
polecat
Cafe Racer
***
Offline Offline

Posts: 211


« Reply #2 on: June 13, 2015, 15:19:13 »

i have no photo's but i have a 125cc x7 to do up i don't no what the swing arm bearings are like but i will check and do photo's if need be i don't know why they don't fit grease nipples they only cost pennies
polecat
Logged

scooter piaggio x7 125cc 2008
bedlington northumberland
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!