X9 evo removing screen panel

[allen m]

Hi all
I seek more help, please.
I want to remove the top panel, which supports the clear screen on my 125 evo. I have remover the 'V' panel , light unit and the 4 screws round the top panel as per Hayne's manual. However the pair of legs that support the clear screen won't move from the facia section in front of the speedo/rev counter section. Are these legs a push fit and lever out or are they screwed in some way? If screwed how do I get at them?

Thanks again
Regards
Allen Morgan

[Dave Milnes]

Leave the supports in place and unscrew the screen support from on top of them. Remove the rubber pads with the 4 push in caps from each support where the top screen rests and reveal a cross head screw holding the panel to them. The supports then screw onto the top of the dash with another screw down the hole at the base.

[allen m]

Thanks Dave
 A puzzle is so easy when you know the answer.
Regards
Allen