X9 Owners & Riders Club
July 18, 2019, 07:15:39 *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: New member confirmation emails may not be going out so keep checking back using the log on details you asked for.
 
   Home   Help Website Gallery Login Register Donate  
Pages: [1]   Go Down
  Print  
Author Topic: Greasing Driven pulley bearing housing  (Read 3627 times)
Didediedide
Guest
« on: January 17, 2014, 07:00:05 »

G,Day All, Probably the first question of many, in the service manual for my 2008 250 xevo one of the things that should be done every 10000 Kms is   " Grease driven pulley bearing housing" . Where is it and how do you get at it?      Regards Paul.                                                                                                                                                           P.S. Using the search function on this forum I couldn't find any info on this issue, unless I was doing something wrong       
Logged
Dave Milnes
Administrator
Stunt Rider
*****
Offline Offline

Posts: 20631


Fylde Coast


WWW
« Reply #1 on: January 17, 2014, 22:08:04 »

When you change the belt the pulley half needle rollers need a smear of fresh grease, that's all.
Logged

2004 X9 500 Evo in YELLOW - 2018 Honda Forza NSS300
Anderton 2004, Pen-y-cae 2005, Matlock 2006, Hay on Wye 2007, Minehead 2008, St Florence 2010, Newent 2011, North Kyme 2012, Betsw-y-coed 2013, Hardraw 2014, Parkend 2015, Whitby 2016, Mundesley 2017, Derby 2018, Telford 2019.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!