X9 Owners & Riders Club
December 13, 2019, 05:41:23 *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: New member confirmation emails may not be going out so keep checking back using the log on details you asked for.
 
   Home   Help Website Gallery Login Register Donate  
Pages: [1]   Go Down
  Print  
Author Topic: New valve stem fitted  (Read 2395 times)
esmondb
Ornithologist
Member
Provisional
**
Offline Offline

Posts: 209



« on: August 12, 2011, 16:51:35 »

Due to a persistent slow deflation of my front tyre (had to pump the tyre up every two/three days) I jacked-up the front wheel of my XEvo and lowered it back down into a very large bowl of slightly soapy water - the 'bowl' was actually a large tub the council had given me to recycle paper and cardboard.
I was pretty sure the leak was coming from between the valve stem and the alloy but it was good to confirm that there were no other leaks.
I rode round to my local tyre fitters - http://www.merityre.co.uk/tyres-littlechalfont.htm who said they'd be more than happy to fit the new valve stem if I could first remove the wheel... aah

Right then, how do you remove the wheel? Thankfully Dave Milnes' instructions http://www.x9ownersclub.co.uk/forum/index.php?topic=20345.msg235210#msg235210 are both clear and concise.

The instructions are exactly the same for XEvo as for the X9, except for the bit about the speedo sender - the speedo for the XEvo attaches via the rear wheel.

So, back on the jack, remove wheel, carry wheel put wheel in car, drive to tyre fitters.

Before he could even finish his ciggie, tyre guy had (partially) removed tyre, removed old valve, applied sealant, fitted new valve, refitted and inflated tyre.
The only snag... when I asked to re-inflate to 2.5 bar he looked at me like I was from another planet - apparently he only works in old money.

And the cost? "Nothing mate, it's only a valve".
Result!

Reverse instructions to re-fit wheel et voilĂ ! Everything fitted back together perfectly and there were no spare screws left over

A big thank you to Mr Milnes and the X9OC, without whom none of this would have been possible.
Logged

regards,

Esmond
NRG DD, Runner SP, Runner VX, X8 125, X8 250ie, XEvo 400, X10 Exec 350 - heated grips
Mr.Chips
Administrator
Stunt Rider
*****
Offline Offline

Posts: 14459



« Reply #1 on: August 12, 2011, 16:57:46 »

How very nice to hear from you - I hope all's well.
Good to hear of your success and the excellent service from the tyre-man.

 
Logged

Mike.
2013 Honda Silverwing 600: 'The Crowman' - Pure Black, ABS, Givi Airflow Screen, Top-Box and Universal Handlebar Muffs.
When did you last read the Highway Code?
Now part of the SW England (Salisbury) Chapter.
"All that is necessary for the triumph of evil is that good men do nothing."
Edmund Burke
http://www.youtube.com/watch?v=NoPlwPUYWaw&feature=channel
loonymoon
Cafe Racer
***
Offline Offline

Posts: 1577


Ex- Xevo pilot


« Reply #2 on: August 15, 2011, 10:29:36 »

That's very good service!

Hows the XEvo going these days - you've been to the moon and back mileage wise  on yours haven't you?
Logged

Scooterless now :-(

ex- XEvo 400 owner
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!